wismec R40 pod

ع.د50.000 10%

The Wismec R40 40W Pod Kit, which with the most compact and solid structure, creatively decorated with dazzling grille panels, the R40 Pod Kit built-in 1700mAh battery and max output 40W, with the type-C fast charging port, the built-in battery will be fully charged in a short time. adopts the 0.96 inch OLED screen and smart user interface, will show you the vaping data clearly and intelligently. when you attach the Pod, the screen will show the detected resistance of the Coil and the suggested wattage range, the Pod Device will turn to the optimum wattage automatically when in smart mode. the Refillable Pod can hold 3ml e-juice, easy to inject your favorite e-juice via the side filling hole, there are 3 types of Coils available, the 0.8ohm single regular coil, 0.3ohm mesh coil and R80 RBA, you could use them for the DL or MTL vaping, if you are the DIY lover, you could choose the RBA Core. the Pod comes with the dustproof cap, when you vape, take off the cap and attach it to the bottom, if not vape, put on the cap and will keep the Pod Device clean inside your pocket or bag.

Features:

  • Material: Zinc Alloy + PCTG
  • Size: 96*27.4*27.4mm
  • Colors: Ruby, Sapphire, Black, Silver, Silver&Black
  • Max Output Power: 40W
  • Built-in 1700mAh Battery
  • Working Modes: VW, Smart
  • Charging: 5V/2A
  • 0.96 inch OLED Screen
  • Over-Charge Protection
  • Over-Discharge Protection
  • Over 10S Protection
  • Short-Circuit Protection
  • Over-Current Protection
  • Temperature Protection
  • USB-C Fast Charging Port
  • —————————————
  • Pod Capacity: 3ml
  • Coil Base Airflow Adjustable Design
  • Convenient Side E-Juice RefilL Design
  • WV01 Single Coil, 0.87ohm, 12-20W
  • WV-M Mesh Coil, 0.3ohm, 25-40W
  • R80 RBA

Includes:

1*Wismec R40 Battery

1*R40 Pod

1*WV-M Coil 0.3ohm

1*WV01 Single Coil 0.8ohm

1*USB-C Lanyard

1*Quick Start Guide

1*User Manual

1*Warranty Card

Note: please ensure you have basic knowledge on how to properly use it.

1)If the tanks use sub-ohm coils, vapers must be sure that your device and batteries can handle sub-ohm coils, only recommend experienced users order this, extra safety precautions should be practiced when using a sub-ohm tank. the tank only works with the mod that can support the atomizer and coil. if you have a tank and resistance is 0.3ohm, you must sure that the mod or battery can support resistance low to 0.3ohm. improper use and lead to injury or damage. use the OHMS LAW Calculator to check. if you have a question, please feel free to contact us.

2)users need to pay attention to Li-ion cells when vaping. the batteries very sensitive to charging characteristics and may explode or burn if mishandled. so vapers must have enough knowledge of Li-ion batteries in charging, discharging and assembly before use. please use the fire-proof surface battery charger, never leave a charging battery unattended. we will not responsible for damage to the human reason or mishandling of Li-ion batteries and chargers. the device always recommends work with rechargeable lithium-ion IMR batteries with min output current 20A or higher.

Categories: , ,

Description

The Wismec R40 40W Pod Kit, which with the most compact and solid structure, creatively decorated with dazzling grille panels, the R40 Pod Kit built-in 1700mAh battery and max output 40W, with the type-C fast charging port, the built-in battery will be fully charged in a short time. adopts the 0.96 inch OLED screen and smart user interface, will show you the vaping data clearly and intelligently. when you attach the Pod, the screen will show the detected resistance of the Coil and the suggested wattage range, the Pod Device will turn to the optimum wattage automatically when in smart mode. the Refillable Pod can hold 3ml e-juice, easy to inject your favorite e-juice via the side filling hole, there are 3 types of Coils available, the 0.8ohm single regular coil, 0.3ohm mesh coil and R80 RBA, you could use them for the DL or MTL vaping, if you are the DIY lover, you could choose the RBA Core. the Pod comes with the dustproof cap, when you vape, take off the cap and attach it to the bottom, if not vape, put on the cap and will keep the Pod Device clean inside your pocket or bag.

Features:

  • Material: Zinc Alloy + PCTG
  • Size: 96*27.4*27.4mm
  • Colors: Ruby, Sapphire, Black, Silver, Silver&Black
  • Max Output Power: 40W
  • Built-in 1700mAh Battery
  • Working Modes: VW, Smart
  • Charging: 5V/2A
  • 0.96 inch OLED Screen
  • Over-Charge Protection
  • Over-Discharge Protection
  • Over 10S Protection
  • Short-Circuit Protection
  • Over-Current Protection
  • Temperature Protection
  • USB-C Fast Charging Port
  • —————————————
  • Pod Capacity: 3ml
  • Coil Base Airflow Adjustable Design
  • Convenient Side E-Juice RefilL Design
  • WV01 Single Coil, 0.87ohm, 12-20W
  • WV-M Mesh Coil, 0.3ohm, 25-40W
  • R80 RBA

Includes:

1*Wismec R40 Battery

1*R40 Pod

1*WV-M Coil 0.3ohm

1*WV01 Single Coil 0.8ohm

1*USB-C Lanyard

1*Quick Start Guide

1*User Manual

1*Warranty Card

Note: please ensure you have basic knowledge on how to properly use it.

1)If the tanks use sub-ohm coils, vapers must be sure that your device and batteries can handle sub-ohm coils, only recommend experienced users order this, extra safety precautions should be practiced when using a sub-ohm tank. the tank only works with the mod that can support the atomizer and coil. if you have a tank and resistance is 0.3ohm, you must sure that the mod or battery can support resistance low to 0.3ohm. improper use and lead to injury or damage. use the OHMS LAW Calculator to check. if you have a question, please feel free to contact us.

2)users need to pay attention to Li-ion cells when vaping. the batteries very sensitive to charging characteristics and may explode or burn if mishandled. so vapers must have enough knowledge of Li-ion batteries in charging, discharging and assembly before use. please use the fire-proof surface battery charger, never leave a charging battery unattended. we will not responsible for damage to the human reason or mishandling of Li-ion batteries and chargers. the device always recommends work with rechargeable lithium-ion IMR batteries with min output current 20A or higher.